If you are looking for the replacement cable with the clips/clamps for your CTEK 3300 trickle charger, you will need the CTEK Battery-Health Indicator Cable w/ Clamps for 12-Volt Comfort Connect Chargers # CTEK56384. This will connect to all CTEK Comfort Connect chargers and will also have a simple, traffic-light-style display to help tell you when you need to charge your batter.
Green: Battery is in good condition and does not need to be charged
Yellow: Battery should be charged to avoid... view full answer...
The Replacement Converter # PD4645V will replace your model 6345 power converter. This is also a 45 amp converter and has a built in charger that works on flooded lead acid, AGM, and gel batteries. The charger monitors the condition of the batteries to prevent overcharging. view full answer...
We can certainly point you in the right direction, although I do not have a way to look up exactly what model converter/charger you currently have in your 2017 Winnebago Micro Minnie. If you can provide the brand and model number of your current battery charger/converter I would be happy to confirm the correct replacement. For example if your current battery charger/converter is rated for 45 amps the Progressive Dynamics 9300 Series RV Converter Charger # PD69RR which is compatible with... view full answer...
Yes, you can replace the Trailer Breakaway Kit Battery Charger # 20011 on the Hydrastar Marine Electric Over Hydraulic Actuator Kit # HS381-9067. You will only need to wire in the new charger in place of the old charger.
Be sure to use Heat Shrink Butt Connectors # DW05744-5 to seal up the electrical wiring and prevent damage from corrosion. view full answer...
You can definitely use this as an upgrade/replacement but you will need to verify the size wiring for charging your battery bank and upgrade that too if needed. If your currently installed converter is the 900 Series Magnetek 950, your DC output for charging the battery bank is 50-Amps and you probably have 8 AWG wire installed. The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger, # PD9260C provides 60-Amps for charging the battery bank and 8 AWG is adequate for... view full answer...
We have the Bright Way Trailer Breakaway Kit # 3802339 which is the entire kit. Or we have the Battery # 3801250 and Charger # 3802349 separately if your case is not damaged. The charger maintains the charge on the battery when connected to your trailer. This ensures when the emergency brake away cable is pulled the electric trailer brakes have the power they need to stop the trailer and prevent it from rolling away. view full answer...
The cable that came with the CTEK Multi US 3300 charger is the CTEK Comfort Connect M6 (6.4-mm) Spare Battery Cable # CTEK56260 which has the 6.4mm connection. view full answer...
I went ahead and checked out your Firman WO3383IR and it turns out unfortunately the receptacle you're referencing is not replaceable.
That said, the only replacement we carry that you're needing as well is the Replacement 12V DC Battery Charger for etrailer Portable Inverter Generator # 333-330713634. view full answer...
There are replacement parts for the Bright Way Push-to-Test ICU Trailer Breakaway Kit with 0.5-Amp Charger and 5 Ah Battery part # BW94FR but the case/charger is not one of them. Therefore, if you want to upgrade you'd be looking at an entire new system but as the case and charger are the bulk of the kit, you aren't wasting much money. Furthermore, not all breakaway batteries fit in this case so you need to be sure you're using the one that comes with. view full answer...
There are 3 different battery chargers for the Trailer Valet remote controlled dollies and the correct one just depends on the weight rating of your dolly:
3,500 lbs - # TV77FR
5,500 lbs - # TV87FR
9,000 lbs - # TV27FR
Once you know the weight rating of your Trailer Dolly just choose the corresponding charger and you're all set! view full answer...
Yes, the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger # PD9260C will work great as a replacement for your Magnetek 900 series model 940. view full answer...
You will be able to use the Breakaway Kit Replacement 12 V Battery # HM20008 for your Pro Series Push to Test Breakaway Kit # 50-85-315. These batteries do tend to go out as they sit for extended periods of time with no use. Do be sure to check and ensure the integrated charger is still working when connected to the tow vehicle as you may need to replace the charger as well. view full answer...
The Replacement 12V DC Battery Charger for etrailer Portable Inverter Generator # 333-330713634 does appear to be the same charger as the one in your picture that came with your RP12000E CAT portable generator.
It has the same model number, part number, input and output specs. We do not carry the Cat/Caterpillar generators, so I cannot "confirm". But as far as I can tell, this is the same charger you currently have. view full answer...
The Progressive Dynamics # PD4655LIV is exactly what you need. No need to replace the entire power center, just the converter/charger section. The # PD4655LIV will provide 55 amp charging for your lithium battery(s). view full answer...
We do have a solution available for you. I suggest you replace your current inoperable WF-8845 with a Progressive Dynamics option as these are solid and reliable units that are very cost effective. The 12VDC, 45 Amp, Inteli-Power RV Converter and Smart Battery Charger, # PD9245C matches well to the specs of your current WF-8845. This unit will work with flooded lead acid, AGM, and gel batteries but has the advantage over the WF-8845 being equipped with a smart charger. This mode is especially... view full answer...
I do have an option for you but there won't be a replacement converter you can install in your existing panel to charge lithium batteries. The entire panel would need to be replaced. For that we have the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger # PD4045KA which has the 6 AC branch circuits you are needing and will work with lithium-ion, flooded lead acid, AGM, and gel batteries. view full answer...
For the Dexter Trailer Breakaway Kit with Built-In Battery Charger # 34-285 there is no specific replacement battery. This uses a 12-Volt lead-acid battery so for a replacement you just need to find the same kind of battery with dimensions that will allow it to fit inside of the case. The case dimensions are 6-5/16" long x 3-3/4" wide x 5-3/4" tall. view full answer...
I do have a potential option for you, but unfortunately your current converter does not have a lithium battery replacement converter section available for it. You would need to completely replace your power center with one like the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 45 Amp # PD4045KA. This is a 2-in-1 AC/DC distribution panel and converter charger. It will be compatible with Lithium batteries, as well as flooded lead acid, AGM, and gel batteries. view full answer...
To replace the charger/converter on your Magnetek 6345 you need the 45 Amp Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel # PD4645V as well as a jumper change to the Li position that you can get from Progressive Dynamics or a a computer store.
I confirmed this with my contact at Progressive Dynamics. view full answer...
Per specs available to me, the Parallax 7400 Series converter charger has a 55 Amp rating. The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger, # PD9260C is a 60-Amp output and confirmed to be a valid replacement.
This smart converter charger works with flooded lead acid, AGM, and gel batteries. view full answer...